Duplicate the layer 1, by pressing Shift + D. Located in the copy we just did, (remember that we had not become the vector layer and we can not export a seal without first having removed) we do in this new image and go to File / Export / Seal Pictures:

in this window, type a name for the image we want to save and accept.

Since this stamp in the tube or safe in our portfolio of tubes / Stamps Now will keep donuts, tube format, with different sizes and shapes.

Keeping the tubes or stamps multiple way, with different sizes and shapes.

1, go to the Rubber Stamp tool and apply a new transparent image-size pair that we can work comfortably:

2 ° With the deform tool we will be giving different forms to donuts and we inserting:

Placing the mouse cursor over the dark spots, we can 'stretch' or 'shrink' the image to our liking. Where we draw a circle 'turn' our picture into the position we want. If you hold down the Control key while we place the mouse on one of the points, we see that the deformation vary sideways if the Shift key, it will up or down in diagonal

3 º Repeat the previous step until the dumplings have thus more or less:

We can even apply shadow at this time, prior to storing as stamps I use these settings:

We could now go to export as Tube / Seal, but depending on the position and separation of the images, we could find to his surprise that when applying the tube, we display the images 'cut' so let's do it like touch it?

Moreover, as we know, there are cases where we have many tubes in the folder of them and noticed that the program is slow and you can even get to hang. This is because we have large tubes and need lots of memory that may not have available. For the same reason it is advisable that when saving a magnet, either format will be, we do the smallest size possible.

To create Tubes / seals and bearing in mind what I said before, we create a grid with cells of a size appropriate to the images. In this case, as we have images of different sizes, we will consider taking the day most of them.

4 ° And to know the size it is the image we will:

The select and: Copy / Paste as new image in the right corner of the screen we know exactly what are the steps:

Now we can memorize or write down for later because we have to change the size of the cells that have the Grid.

5 º Go to View / Change Grid properties ....

We see a window set up this way by default:

This means that each square in our grid has 10 × 10 pixels, we can see, activating it:

This image, of being in actual size (this on a scale of 150%) would have measures of 80 pixels wide by 70 high and we have 8 cells in width and 7 on high or long.

6 ° We recall that our donut, mean 58 × 38, we give a size for the cells to fit perfectly inside. so add at least a couple of pixels to the size of the cell and the properties of the grid are going to put this:

and accept.

(Remember, later relocating the measures we had or cells will always have these measures)

7 th will open a new image now 60 × 3 = 180 pixels wide and 40 × 2 = 80 pixels high. Activate the grid, as we saw above, and will place the donuts in the center of each cell:

8 º Go to File / Export / Image As Stamp:

In Horizontal cells, will the number of images that we fear to export = 3 = 2 in vertical cells

Automatically displays the 6, which is the number of cells we have. In name, which will have chosen to identify our Tube, in this case = fritters

Options:

• Continuous = with images evenly spaced as the step value.
• Random = with images spaced with a spacing between
• 1 pixel and the step size.

Mode selection:

• Random = randomly selected images
• = Incremental selects images one by one, starting with the top left of the cell and ending at the bottom right.
• = Angular selects images in the direction of the brushstrokes.
• Pressure = select images according to the pressure applied on sensitive tablet.
• Speed ​​= selects the images based on the speed at which you drag the tool to paint.

And finally accepted and we have created our Tube ready to usar.Practicarlo and see that it is not as difficult as it might seem at first sight, but that if very gratifying to be able to create our own images and make them easy to share Tubes or Labels or just use them when needed.